This is the main controller board.
It contains an AVRcontroller that can
be programmed through the header. It has a buzzer for user notification.
There are
two output MOSFETs for staging or ejection charges.
It has a header on one side that
allows stacking.
The board measures 1" x 2".
All arming and ejection charge connectors are on the wireing harness board. This allows easy removal and installation because all wiring goes through the harness board.
I wanted to bring down the cost of the parts for the controller so I checked into using different parts to bring down the cost. I also removed the EEPROM from the board because I ran out of room because I used a larger buzzer.
Trace Patterns Detailed parts list
| Low cost AVR Controller | ||||||
| Supplier Part Number | Manufacturer Part Number | Price | Qty | Total | Supplier | Description |
| AT90S2313-10SC-ND | AT90S2313-10SC | $3.66 | 1 | $3.66 | Digi-Key | AVR microcontroller |
| 83F6060 | MIC5205-5.0BM5 TS | $1.09 | 1 | $1.09 | Newark | 5V regulator |
| 06F8355 | IRF7101 | $1.71 | 1 | $1.71 | Newark | SO-8 MOSFET N-CHANNEL 3.5A |
| 94B3138 | AST100 | $1.97 | 1 | $1.97 | Newark | Buzzer |
| H2045-ND | DF11-16DS-2V(20) | $1.68 | 1 | $1.68 | Digi-Key | Surface Mount Vertical Socket |
| H2056-ND | DF11-16DP-2DSA(20) | $0.59 | 1 | $0.59 | Digi-Key | Verticle Protected Header |
| 263-10K | XICON | $0.08 | 3 | $0.24 | Mouser | 1206 SMD 10k resistor |
| 263-100K | XICON | $0.08 | 2 | $0.16 | Mouser | 1206 SMD 100k resistor |
| 263-47K | XICON | $0.08 | 2 | $0.16 | Mouser | 1206 SMD 47k resistor |
| 77-VJ12V16V105Z | VJ1206V105ZXJMT | $0.33 | 1 | $0.33 | Mouser | 1206 SMD 1.0uF capacitor |
| 140-CC501B104K | XICON | $0.14 | 1 | $0.14 | Mouser | 0805 SMD .1uF capacitor |
| 74-293D16V10 | 293D106X9016C2T | $0.97 | 1 | $0.97 | Mouser | 10uF TANTALUM SMD CAPACITOR |
| 140-CC501N270J | XICON | $0.084 | 2 | $0.17 | Mouser | 0805 SMD 27pF capacitor |
| 559-FOXSD073-20 | FOXSD/073-20 | $0.69 | 1 | $0.69 | Mouser | SMD CRYSTAL 7.3728 MHZ |
| Total Cost | $13.56 | |||||